colinnwn Posted March 30, 2019 Share Posted March 30, 2019 I took my radio and climate dash trim bezel off to install my electric brake controller display and manual activation lever. Getting the whole thing installed is a project that will never end. When I unscrewed the screws at top, the plastic ears broke off above the mid-point of the circle. I superglued the plastic back together to have a flat foundation, but I knew that would not be strong enough to last. So I used JB Weld to glue 2 metal washers to the plastic to reinforce it. It seems to have worked well. Just a warning if you take it apart, be ready for the plastic bits to fall off so you can find them. The 2nd pic shows how I installed the manual activation lever through one of the switch knock out panels. 3 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now