KILLANOLA Posted June 23, 2016 Share Posted June 23, 2016 What is the best way to bypass Safety Clutch switch without sadering? My mechanic was working on something else and told me can't do it for legal reasons but an owner can. Link to comment Share on other sites More sharing options...
vagabond Posted June 24, 2016 Share Posted June 24, 2016 find the safety relay pull it make a jumper wire 10 gauge is what I did look where the relay was and plug the jumper into the 2 large wires(JUST REMEMBER IT WILL NOW START IN GEAR) on the jumper wire I used male spade connectors to plug into the relay harness Link to comment Share on other sites More sharing options...
KILLANOLA Posted June 28, 2016 Author Share Posted June 28, 2016 I can seem to get the safety relay plug popped off. Does it have a release on both sides? All I can see is one side. Thanks Link to comment Share on other sites More sharing options...
KILLANOLA Posted June 28, 2016 Author Share Posted June 28, 2016 It can't ... Is what a meant to say Also does the entire plug screw into the metal plate? I can't get that off either. Link to comment Share on other sites More sharing options...
vagabond Posted June 28, 2016 Share Posted June 28, 2016 push down on the relay it should slide off the mounting bracket, remove the plug with the large wires, the one on our 94 the wires are black with a yellow stripe remove that plug and install the jumper wire( REMEMBER IT WILL START IN GEAR WITHOUT PUSHING IN THE CLUTCH IF YOU DO THIS) Link to comment Share on other sites More sharing options...
KILLANOLA Posted June 30, 2016 Author Share Posted June 30, 2016 Hmm still can't get it off the bracket or get plug off Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now