Viking2_718 Posted April 20, 2016 Share Posted April 20, 2016 For those who have installed an ARB bullbar on their pathy, would you post a snap of the mounting inside the engine compartment? I've got everything figured out except that. tia Link to comment Share on other sites More sharing options...
Kyle_Cope1 Posted April 29, 2016 Share Posted April 29, 2016 Not sure why nobody has told you yet. But ARB hand designs their bumpers, and they design them to for on the existing bumper mounts. At least I think most of em are like that. Link to comment Share on other sites More sharing options...
Charlie_Brown Posted May 3, 2016 Share Posted May 3, 2016 The only thing I can say about this is my experience with an ARB winch bar for a 92 pathy did not fit directly. It should have but was either designed incorrectly or my pathy was hard core wrecked at some point and restraightened because it sits way too high and can't bolt onto the frame inside the engine compartment so I had to cut both the truck and winch bar and add washers to drop it down and push it in. Before it would sit so high it wouldn't fit because it was hitting the headlights Link to comment Share on other sites More sharing options...
KovemaN Posted May 4, 2016 Share Posted May 4, 2016 It might have been a bumper for a D21 pickup instead of a WD21 pathfinder. They sit 1.5" higher due to the different body mounts on the D21. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now