DECALMAN Posted May 25, 2015 Share Posted May 25, 2015 My lock and unlock button was not working. After doing some reading I found out that the power door locks are controlled by a little box inside the left rear panel called the POWER DOOR LOCK TIMER. After checking continuity from the master switch I figured out that the switch was sending the signal and I didn't have any cut on the cables. Then I tested the door lock actuators by providing 12v to one side and negative to the other. That also helped me figure out which cable needed power for the doors to lock and viceversa. So, the timer seems not to be working. I could of bought one on ebay but I already had 2 five pin relays handy. So this is how I wired everything. Diagram pic Relay pins will not be lined up like that. I drew it like that so I wouldn't have any lines crossing each other. This will probably work as a Power Window amp alternative also, just find the correct wires. Link to comment Share on other sites More sharing options...
Frenchy Posted October 10, 2022 Share Posted October 10, 2022 Sorry to resurect this but out of curiosity how well has this been working? Any problems over the last 7 years? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now