HPVossno1 Posted March 7, 2015 Share Posted March 7, 2015 When replacing the driver's side front fender, do I have to take the bumper off to get to the front bolts? A body shop guy told me that. This can't be that hard to replace. I appreciate any help. Thank you Link to comment Share on other sites More sharing options...
tdurb1327 Posted March 7, 2015 Share Posted March 7, 2015 If I recall right, I don't think so. I think you just have to take the headlight and side marker light out. It's easy either way. Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
ferrariowner123 Posted March 7, 2015 Share Posted March 7, 2015 Three in the engine compartment. Atleast one in the inner fender well. And then two behind the side marker. -Kyle Link to comment Share on other sites More sharing options...
ferrariowner123 Posted March 8, 2015 Share Posted March 8, 2015 Im stupid, should have actually looked at the MY01 fender i have. YES you will have to remove the front bumper. There is one nut that sits under the front marker, (might have two, the one i have has an extra hole, but no signs that there was actually anything there). There is also another fastener behind the headlight. Sorry if you already tried and figured this out. -Kyle Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now