anzaman Posted March 3, 2015 Share Posted March 3, 2015 Haynes manual is rather vague on this procedure. Can I replace the bushings without taking the entire rack apart on my '98? Link to comment Share on other sites More sharing options...
Rebelord Posted March 4, 2015 Share Posted March 4, 2015 Yup. Its easy. Just remove the two mounting brackets. Pull the old ones out, and slide and rotate the new ones one. Do the drivers side first since its odd shaped. With the passenger side out, you have more room to pull the rack out to get the new one behind it. Once both are on and centered where they are supposed to be. Re install the the mounts. Link to comment Share on other sites More sharing options...
Karmann Posted March 4, 2015 Share Posted March 4, 2015 The factory design is split, so as above just take the mounting bracket off, lube it up and slide off the stock ones, the new ones should line up. Make sure to keep the indents lined up and you're good to go. Link to comment Share on other sites More sharing options...
anzaman Posted March 10, 2015 Author Share Posted March 10, 2015 Thanks Rebelord and Karmann for the advice. Just got done replacing bushings and fixed my steering problems. 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now