RamboRedRex Posted November 26, 2014 Share Posted November 26, 2014 wanting to know if I should replace my head bolts when i do my head gasket, also anyone have the part number for the studs that go onto the head for the exhaust manifold? Link to comment Share on other sites More sharing options...
5523Pathfinder Posted November 26, 2014 Share Posted November 26, 2014 (edited) Yes you should. They are torque-to-yield bolts, meaning that they stretch everytime they are torqued. I dont have the part number, but contact Alkorahil(Rob) in the Services section(our resident nissan parts guru). Edited November 26, 2014 by 5523Pathfinder Link to comment Share on other sites More sharing options...
k9sar Posted November 26, 2014 Share Posted November 26, 2014 yes on the head bolts and make sure you get the manifold studs for the 300zx and not the pathy. They are threaded the same but better material and less likely to break. The part number is on the forums somewhere... some searching on stud and part number might yield you answer Link to comment Share on other sites More sharing options...
Kingman Posted November 26, 2014 Share Posted November 26, 2014 Here's a complete kit for the manifold studs. http://store.acadianasportscars.com/bk056-0030 Or if you want stainless but you might have to drill and tap to 10mm http://store.acadianasportscars.com/bk056-0045 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now