chop311 Posted July 16, 2014 Share Posted July 16, 2014 (edited) Anybody know why my warn manual hubs would be heating up to an untouchable point just after a few miles of driving? Already replaced cv axles, bearings, and brakes. It's also my lug nuts and wheels around the lugs. Edited July 16, 2014 by chop311 Link to comment Share on other sites More sharing options...
Precise1 Posted July 16, 2014 Share Posted July 16, 2014 Your brakes are dragging or your bearings are not greased/too tight or some combo there of. I'd go with #1 off the bat as brakes dump a tremendous amount of heat into the system. (might have to do with your driving habits as well) I was going to a shop to talk about the front hub installation issue I was having when I had to do a panic stop on the freeway (60 mph to 10 ASAP). The hubs were still HOT 10 minutes later; that is a lot of Joules to distribute... B Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now