need help with lift

[thorpe991]

so no need for the camber bolts

 

[devonianwalk]

I had success using two kits (4 bolts) keeping my tires straight. Others claim that they are not necessary. I'd recommend holding off on getting them if you decide that you don't develop the "bulldog" stance.

[96Pathfinder4x4]

^2nd that.

 

After the install, get an alignment....see if you're lucky like me.

[PrestonBurns]

I had to use 2 kits. Guess it varies

[96Pathfinder4x4]

I had to use 2 kits. Guess it varies

 

AC lift or OME?

[Karmann]

Stock length struts yes. Look at rockauto for the KYB GR-2s. That's what I have (no lift ATM) and I'm quite satisfied.

[Karmann]

Stock length struts yes. Look at rockauto for the KYB GR-2s. That's what I have (no lift ATM) and I'm quite satisfied.

[96Pathfinder4x4]

Stock length struts yes. Look at rockauto for the KYB GR-2s. That's what I have (no lift ATM) and I'm quite satisfied.

 

That's what I have as well, but I have the OME 2" lift springs in there.

[PrestonBurns]

 

AC lift or OME?

 

AC

[96Pathfinder4x4]

You're not the first to mention this with the AC lift...I'm wondering if all persons that have needed the camber kits have the AC lift....?

[thorpe991]

So if I go with the ome coils I most likely don't need the camber kits? And can I order the ome coils from ome.com?

 

 

Sent from my iPod touch using Tapatalk - now Free

[devonianwalk]

The AC springs give a higher lift (2"). The OME springs are 0.5" and go up to 1.5". I believe that is the reason that AC suggests them. Well, that and they sell 'em.

[Tad]

We did the OME springs from rocky Road, HD front and MD rear.

Our fronts were really sagging badly.

We got 2.5" front and 2.25" rear.

It's been almost two years now and they have maintained that height.

[thorpe991]

ok so iv decided im going to go with the ome coils from rocky road and get the gr-2 struts from rock auto

on rocky road it said pathfinder suspension with out struts ... does this mean it comes with the longer shocks?

[96Pathfinder4x4]

We did the OME springs from rocky Road, HD front and MD rear.

Our fronts were really sagging badly.

We got 2.5" front and 2.25" rear.

It's been almost two years now and they have maintained that height.

 

 

I also did the OME and my results were about the same.

 

I think if you go with OME and go soft springs, you may get less. I did stiff front and medium rear.

[thorpe991]

 

 

I also did the OME and my results were about the same.

 

I think if you go with OME and go soft springs, you may get less. I did stiff front and medium rear.

i plan on doing the stiff all the way around as i ride atvs and dirtbikes alot and im the driver so ill be towing a 12ft trailer with 4 to 5 atvs then probbly just as many dirtbikes

[Tad]

i plan on doing the stiff all the way around as i ride atvs and dirtbikes alot and im the driver so ill be towing a 12ft trailer with 4 to 5 atvs then probbly just as many dirtbikes

OME does not make a HD/stiff rear coil, just the MD version.

Part Numbers:

MD Rear 922

HD Front 928

 

That sounds like a lot to tow.

Overall weight and tongue weight play a large roll in that and of course how far and what type of terrain.