98greenmachine Posted November 16, 2012 Share Posted November 16, 2012 Hi, I'm new to this outfit and I'm working on 2 different 98's. I'm in the middle of an engine rebuild on my 4x4, but I also need to replace a tranny in my 2wd, that I hope to use for a commuter. Has anyone swapped a 2wd tranny from a Frontier or pickup? Parts yards that I've asked are saying that it has to be from '96 - '99 2wd Pathfinder. The online interchange says they have the same model of tranny, though. I get it that 2wd & 4wd won't swap, but I'd think that others would swap and maybe just have to change some elect connections, etc. I'm hoping someone may have been there and done that. Any help is appreciated! Link to comment Share on other sites More sharing options...
silverton Posted November 16, 2012 Share Posted November 16, 2012 automatic? it should be a bolt in, plug in affair. I have a 03 xterra s/c automatic in my 95 pathfinder. Link to comment Share on other sites More sharing options...
Trogdor636 Posted November 16, 2012 Share Posted November 16, 2012 automatic? it should be a bolt in, plug in affair. I have a 03 xterra s/c automatic in my 95 pathfinder. He is trying to narrow down a tranny for a 2WD though. Link to comment Share on other sites More sharing options...
silverton Posted November 16, 2012 Share Posted November 16, 2012 if you get the transmission out of a 2wd truck, it should bolt and plug in. Link to comment Share on other sites More sharing options...
98greenmachine Posted November 16, 2012 Author Share Posted November 16, 2012 Thanks for the reply. I thought that would be the case and that maybe they're were slight changes because of OBDII. I'll crawl under a pickup at the boneyard and make a close comparison to the one in mine. I wasn't having much luck looking elsewhere online. The vehicle is too nice to scrap, but with almost 300k on the clock, I hate spend the money on a rebuild. I've read about the rear band problems that those tranny's and that I should use he factory transmission fluid. Link to comment Share on other sites More sharing options...
Paulsgirl Posted January 19, 2016 Share Posted January 19, 2016 GRRR.... I am now getting ready to pay my faithful mechanic to put #3 in my beloved 95 Pathfinder ( her name is Patti, by the way) Here is what I was able to find on the transmission exchange. These are all 4X4 models, so if plug and go is correct then any of these should work?? Pick n Pull has started moving the Pathfinders to the Premier Side and I paid an extra $30 for a 1 year warranty. I need to find and get the tranny in quick so I can make sure it's good before I have to buy a Premier Membership at approx $300. Seriously, I'm not sure my pockets can go much deeper here HEEEELLLLLPPPP!!!!! Definitely feeling like a Damsel in Distress!!! Can anyone verify that what I found here is true??? It sure would give me a LOT more choices Automatic Transmission Application Guide www.txexchange.com 1/18/16 Model Years Transmission Type Engine Type/Size Transmission Model QX4 97-03 4 SP 4X4 V6 3.3L 3.5L RE4R01A INFINITY PICKUP 90-934 SP 4X4L4 2.6LR4A-EL RE4R01A MAZDA FRONTIER 99-04 4 SP RWD/4X4 V6 3.3L RE4R01A NISSAN FRONTIER 98-04 4 SP RWD L4 2.4L RL4R01A NISSAN PICKUP/PATHFINDER 88-98 4 SP 4X4 V6 3.0/3.3L RE4R01A NISSAN XTERRA 00-04 4 SP RWD/4X4 V6 3.3L RE4R01A NISSAN Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now