hcr32 Posted October 4, 2012 Share Posted October 4, 2012 Hey guys, Crawled under the rig today and noticed that the front oil seal on the transfer case was leaking. Never tackled one of these jobs before and wanted to see if anyone had done it before. If so, is it just as simple as marking the driveshaft, removing it, removing the yoke from the t-case then prying out the seal, installing the new one and then reverse? Thanks again Link to comment Share on other sites More sharing options...
Towncivilian Posted October 4, 2012 Share Posted October 4, 2012 See page TF-5 of the FSM, it is basically as easy as you state. Link to comment Share on other sites More sharing options...
hcr32 Posted October 4, 2012 Author Share Posted October 4, 2012 Great! Thanks very much for the link! I thought I had seen a more detailed Manual other then the Chilton one I got kickin around. Thanks again Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now