edolmseth Posted October 1, 2012 Share Posted October 1, 2012 I am planning on changing out the O-rings on the oil cooler since it is leaking and the FSM states that you must drain both the coolant and engine oil. I was just going to pull the center bolt and swap out the O-rings. Do I really need to drain both the coolant and engine oil? I would like to avoid that since both fluids are fairly new. It seems like the oil cooler is above the oil pan so it should be fine. Does anyone have any experience with this? Link to comment Share on other sites More sharing options...
Towncivilian Posted October 1, 2012 Share Posted October 1, 2012 http://forums.nicoclub.com/post5166463.html#p5166463 You will need to drain the oil. Just leave the oil filter on there if it's relatively new and refill with oil. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now