Cryphix Posted June 24, 2012 Share Posted June 24, 2012 I need to replace my 1996 Pathy rear passenger window motor and I was wondering if someone had a schematic or a video that could help me with replacing it. Link to comment Share on other sites More sharing options...
ahardb0dy Posted June 24, 2012 Share Posted June 24, 2012 No video but shouldn't be much different than a front window: remove door panel remove plastic film if it has it unbolt glass from regulator if it is accessible, make sure to have someone hold the glass raise glass all the way up and shim it to stay up with wooden wedges remove 4 bolts holding regulator in (2 top, 2 bottom) un plug connector for window motor remove regulator with electric motor replace motor re-assemble What is the window doing/not doing? Link to comment Share on other sites More sharing options...
Cryphix Posted June 24, 2012 Author Share Posted June 24, 2012 My window is stuck in the up position. Also I remove the glass and the motor and the metal guide thing that holds the wire? Link to comment Share on other sites More sharing options...
ahardb0dy Posted June 24, 2012 Share Posted June 24, 2012 (edited) You need to unbolt the glass from the regulator but you don't take the glass out, once the glass is unbolted you need to shim the glass fully up to give room to get the whole regulator assembly out. With the window stuck fully up the mounting bolts that hold the glass to the regulator may not be exposed, you may have to unbolt the regulator first so the whole assembly with the glass moves down enough to remove the other 2 bolts, than my instructions would be the same, here are some pics: rear regulator assembly, only pic I could find, this whole part needs to come out: http://www.rockauto.....php?pk=3472752 I guess on the rear regulators it appears from that pic that there are 2 screws near the top and one in the middle this is from my truck just to give you an idea, the 2 bolts shown here near the white clips are what holds the glass to the regulator: Edited June 24, 2012 by ahardb0dy Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now