Pacesetter Hearders/Y-pipe connection

[94 Pathy]

I'm soooo sorry to bothering people with this stupid question that I think I already know the answer too....

 

So, I'm wanting to finish the exhaust & be done. I want to have, I believe, the "Collectors" welded onto the headers & the Y-pipe so I can bolt & unbolt when needed. If I recall, someone please correct me if you haven't put your Pacesetter's on yet, measurements please, the tubing diameter is 1 1/2" & collector diameter is 2"? So, I'm looking to purchase 2" collectors to have welded onto the headers & Y-pipe? Yes, I know I'll need to get gaskets/groumets for sealing in between.

 

Thanks a million for your info & again, sorry if I have answered my own question. Been looking & haven't seen anything with measurements/diameters.

[Tungsten]

the collector should be 2.25" for those headers

[94 Pathy]

Thanks Tungsten. I also finally found an old thread of mine talking about the measurements of things also. Now, I need to find somewhere that sells them for not soooo much. I might actually try welding them myself. Bro-in-law has some gas tanks that he's letting me keep & use for welding.

[94 Pathy]

Okay, not the collectors, but the exhaust flanges. I have them ordered & should have them in a few days. FINALLY get the darn exhaust finished.

Now I need to figure out how to drill holes vertically through the frame so I canrun a bolt through top to bottom to bolt my hitch up. Don't feel like paying someone to do the work &/or have it welded on. Frame is just a bit crunched from an accident, so the factory holes don't line up. Need to get that done in a week or two before we move. Need to hook a trailer up to the Pathy.

[Tungsten]

You can try a right angle drill or a right angle drill attachment.