rtm5003 Posted March 28, 2012 Share Posted March 28, 2012 Hello all, I recently picked up a 2002 R50 Pathy SE 4WD M/T with 112k on the clock. Loving it so far, but the suspension is mostly shot, so I've started building up an inventory of replacement parts for it... I've found a TON of valuable information on this site - so thanks for all of your useful input everyone! I decided to go with OME HD Front and MD Rear Springs along with KYB Excel-G's (GR2's) up front and Bilstein 5100's in the rear - these are all sitting at my house now waiting for install... I also purchased all of the required strut mounts, bearings, etc. from NissanPartsZone.com. (Also got some replacement bushings and end links for F&R sway bars and panhard rod. Poly bushings for LCA's and Trailing arms are next!!) My question is regarding the Front Spring Seat Rubber - 54034+B and 54034+A as shown in this diagram: Are these required, or do any of you just install the lift springs right on the strut with no rubber? Each of the upper and lower rubber seats is like $20 each, and I'd really rather not spend $80 if not required... More pics of these bad boys: 54034+A 54034+B Thanks in advance for any advice. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now