Biggest tires stock with fender trimming?

[Guest n16ht5]

How big of tires can you go with just fender trimming/ rear JGC coil mod? i was also thinking of putting in bigger bump stops in the front? I searched but couldnt come up with much. I fit 33X12.5's on a 93 ranger 4x4 stock.

i was planning on getting 15x8x3.75" or 3.5" bs wheels with 33x12.5 MT's... suspension lifting is too much right now, and I dont like body lifts. Can it be done? thanks

 

 

 

chris

 

 

 

[Guest n16ht5]

 

my old ranger (i miss it!!)

[88pathoffroad]

Only if you want to trim a LOT of fender sheetmetal...

 

Generally, the only way to fit 33's without rubbing is to install a 3" body lift and a 3" suspension lift. Mine STILL rubbed after the 6" lift until I trimmed the fenders even more. These things don't have big enough wheelwells, man.

[Guest n16ht5]

darn. and taht was with your 10.5 wide tires?!??! i saw a stock Pathfinder with 32s and the tires didnt have rub marks.. it was in a parking lot. then i saw a pickup with 32s its on my street.. dont think its lifted at all. they both had stock wheels with the lego things. maybe ill go 32s? how do those fit?? im sure if i got very little backspacing (3.5") i could make the 33s fit with trimming? maybe ill have to do a body lift.

 

 

well hey the suspension lift doesnt make a diff to clearing tires would it,, atleast in the front?? because your bump stops are the same place, so the tire goes up the same amount??

[Guest n16ht5]

meh ill just body lift it theyre cheap. whers the cheapest 2" body lift? ebay? where should i go for a replacement UCA? im thinkin lift it the same as yours but 2" body lift. do you have a link to a thread on the breakdown of your lifT? i searched.. cant find it.

 

thanks guy

 

chris