Jump to content
  • Sign In Changes:  You now need to sign in using the email address associated with your account, combined with your current password.  Using your display name and password is no longer supported.

 

  • If you are currently trying to register, are not receiving the validation email, and are using an Outlook, Hotmail or Yahoo domain email address, please change your email address to something other than those (or temporary email providers). These domains are known to have problems delivering emails from the community.

NTB99-004B - Wiring Sub Harness

savagea

By savagea,
in 96-2004 R50 Pathfinders

 Share

Recommended Posts

johnm NPORA Veteran

johnm

Posted
Posted

The TSB will show you how to construct the harness and how to route it in the engine bay. You can pull it up here. The bolts that go in the head are special ones, you need to order them from the dealer, they are 7.5x1 metric. The bolts on the intake manifold are 6x1 metric. When you are buying parts, make sure to get the right size eye connectors. The wire is just wire, I used 16 gauge. I built the harness with the larger eyelets on one end and left it longer than it needed to be, and cut to length after it was routed. I didn't measure the wires after install. I'd guess it was 30" long?

Link to comment
Share on other sites
savagea
NPORA Newbie

savagea

Posted
  • Author
Posted

Thanks for the response. As far as the bolts, I believe I'll be using the existing bolts in the block, and purchasing new ones for the manifold? I thought I saw the sizes somewhere as M6x16 and M8x8. Does this sound correct?

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing
×
×
  • Create New...