savagea

Right, thank you I actually do have the original TSB, which has the original parts list and it why I'm confused. Thank you very much for your reply though.

This TSB says the bolts that I need to connect to the 2 threaded holes on the RH cylinder head are "08146-8121G". I received these today after a week of waiting and they are clearly too small. They are the same size as the small bolts on the other end of the harness on the intake manifold. This is a 1999.5 Pathfinder. Is the TSB wrong?? I'm stuck. Has anyone done this fix and can shed some light??

Thanks, unfortunately they don't provide bolt sizes, only part numbers. Not sure if it's an M7.5, M6, or M8. Thanks for the reply!

Thanks for the response. As far as the bolts, I believe I'll be using the existing bolts in the block, and purchasing new ones for the manifold? I thought I saw the sizes somewhere as M6x16 and M8x8. Does this sound correct?

Does anyone have specifics on this harness like wire AWG and lengths? Or even a pic? I'd like to install this due to some ECM codes but it's pretty expensive at the dealer. Thanks!