Need quick Help with 3" body lift bolt size

[wd21overland]

I'm about to order my 3" body lift from Ruggedrocks.com and i know i will need to adapt the kit to make it work form my year pathfinder.

 

After reading through the forums i know i need to buy M12x1.25X180mm bolts to make the kit work.

 

Just so i get this right i will need to buy 4 of those bolts right?

 

2 for the back and 2 for the middle.

 

i have a friend stationed over seas in england and he said he can get me the bolts and ship them to me easily so just making sure before i have him ship me the bolts.

 

Any help would great.

[Simon]

Nope, only 2 of them. The middle ones will come in your kit. Those haven't changed.

[wd21overland]

Thank you so much for clearing that up. I'm having him sent me a box of 20 since there used in alot of the vehicles over there it seems so he can get them for about $1.35 each.

Edited September 23, 2011 by wd21overland

[Dowser]

count me in for 2 then hahah

[wd21overland]

Yeah i plan on giving them to members in need of rear bolts since there not the easiest to find around here at least.

 

Apparently the bolt size is also the same bolt size used for a starter motor on something over there from renault.

 

its 12Mx1.25x180mm and has 10.9 stamped on the head so good to know.