IanH Posted February 15, 2010 Share Posted February 15, 2010 Ok I searched, cant find anything.... 2003 Part time 4WD SE pathy Auto. the 4WD Hi wont engage, did work fine. ( ie push lever forward.) 4WD-Lo works fine ( Pull lever backwards.) Any ideas what to check ? Thanks Link to comment Share on other sites More sharing options...
BowTied Posted February 15, 2010 Share Posted February 15, 2010 This is a manual tcase, right? What happens, front wheels not grabbing or no movement of the truck at all? Front wheels grab in 4Lo? Link to comment Share on other sites More sharing options...
OldSlowReliable Posted February 15, 2010 Share Posted February 15, 2010 Idk if its diff for an r50, but if it isn't, make sure your pushing/pulling in the correct location Link to comment Share on other sites More sharing options...
Pezzy Posted February 16, 2010 Share Posted February 16, 2010 My R50 (and any others that I know of) requires you pull the lever back one spot for 4 hi. For 4 low, you have to pull back to 4 hi, then (with the transmission in neutral) pull back again to put the t-case into neutral, then push down, and pull back to 4 low. If you don't have the owners manual, it should tell you how to use it on the back of your window visor. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now