Jump to content
  • Sign In Changes:  You now need to sign in using the email address associated with your account, combined with your current password.  Using your display name and password is no longer supported.

 

  • If you are currently trying to register, are not receiving the validation email, and are using an Outlook, Hotmail or Yahoo domain email address, please change your email address to something other than those (or temporary email providers). These domains are known to have problems delivering emails from the community.

Power Antenna


ac92pathfinder
 Share

Recommended Posts

Viagra... :new576:

 

In all seriousness. Have you checked to see if there are any kinks or anything in the antenna that is stopping it from reaching its full potential. If there is any part of the antenna that is losing its shiny coating, or any sort of pitting happening it will add a degree of friction to that area creating a bit of a harder time raising it. I mention this cause you say WD40 works for a little while which would help lubricate the surface and aid in..... "Getting it Up" :wackinit:

 

Could very well be something to do with the motor mechanism side of things though. And I haven't ever looked at how they operate so cannot comment on that.

Link to comment
Share on other sites

The mast has a plastic cable inside of it to raise and lower the antenna. That cable can break, causing the antenna to not go all the way down, or not all the way up. Removed the nut at the bottom of the antenna and turn our radio on. This will push the antenna up and you can remove it and inspect. If there is a piece broken, you may need to remove the antenna motor and remove the nut on the back of it. This will allow you to remove the broken piece. Reinstall the motor. You will need to get a new mast, then you can feed it back into the motor buy turning off your radio. Push down and you may have to move the cable around until the teeth grab and it pulls the antenna in.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...