4Wd Not Engaging

[Daehtop]

so i finally got my brakes done and a few other things on my pathy. now it wont go into 4wd. well i guess it goes cause i get 2hi and 2lo but the front doesnt seem to engage. my hubs are fine. my cv boots are torn, but they have never really popped that much. so i figure they are fine as well. any one got any suggestions?

[87pathy]

well, if your 100% sure that your hubs are ok.. your t-case is jacked.

 

 

do you have auto hubs?

[Daehtop]

sorry my comp took a dump on me and couldnt reply for awhile. and yes i do have auto hubs. i dont know if this sounds stupid but i was wonderinf if its possible for my cv shafts to be broken. but if they are wouldnt they be flopping around in there? espcially when i put it in 4wd? when i engage my 4wd i can hear my t-case, mostly in 4lo or i guess 2 lo. someone please enlighten me a little.

[87pathy]

sorry my comp took a dump on me and couldnt reply for awhile. and yes i do have auto hubs. i dont know if this sounds stupid but i was wonderinf if its possible for my cv shafts to be broken. but if they are wouldnt they be flopping around in there? espcially when i put it in 4wd? when i engage my 4wd i can hear my t-case, mostly in 4lo or i guess 2 lo. someone please enlighten me a little.

 

I bet your hubs are jacked.

 

the autos are notorious for it.

 

get on a slick hill where your back tires only will spin. Put it in 4x4 and have somebody check to see if your front half shafts are turning. If they are, and the front tires are not, then your hubs are jacked.