eazzrider Posted April 1, 2009 Share Posted April 1, 2009 (edited) I purchased a sunroof off e-bay that I was told came out of a 88 pathfinder. When I went to put it in my 88, it is about 1/4 inch too short. The back edge looks great on the seal but the front isn't even close. Am I missing a part? Can someone with the correct parts give me a measurement of the size, front to back? A picture of the front edge would be awesome. thanks, Charlie Edited April 1, 2009 by eazzrider Link to comment Share on other sites More sharing options...
Ramon Posted April 2, 2009 Share Posted April 2, 2009 (edited) Hi Eazzrider !!!! Well my pathy is 1990 and I don't know if the sunroof is same size from 4 door for model to 2 door model in all case this is what I snapped for you just in case this is the front edge from the inside I measured from the inside 15 1/2 inches from rear to front this is the edge in the front from outside with burned paint LOL and this what I measured from out rear water seal to front water seal hope this will help is the user manual diagram from the sunroof Edited April 2, 2009 by Ramon Link to comment Share on other sites More sharing options...
eazzrider Posted April 2, 2009 Author Share Posted April 2, 2009 That's exactly what I needed to see. Thank you very much. Charlie Link to comment Share on other sites More sharing options...
Ramon Posted April 3, 2009 Share Posted April 3, 2009 That's exactly what I needed to see. Thank you very much. Charlie Any time Charlie ! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now