VQ35DE cams...

[Justin517]

Eventually I'd like to get some more oomph out of my VQ (if I keep the path itll probbaly get a full rebuild at around 200k, might as well upgrade) the Jim wolf cams are really expensive. I was thinking that the REV-UP engine cams , if they fit, would be a nice upgrade.

 

Standard VQ cams:

 

Int: 238° duration .377" lift

Exh: 240° duration .377" lift

 

Rev-Up cams:

 

248° duration .417" lift both intake and exhaust.

 

PDF of stock and Jim Wold cam profiles here

 

If you could find them in a junk yard they could probably be a pretty nice upgrade.

 

then I was also thinking about maybe just sending them out to Delta cams in washington state to have them add material and re-ground. I had oen of their cams for my GTI and it was a pretty nice piece and had no wear problems (I actuyally got it used too). I would probably go with something with a 260° duration and a .430"-.440" lift so it would be as much duration as the JWT S1 but with atleast as much lift as the smaller duration/higher lift S2 But still smaller overall than their C2 cam.

 

Any thoughts?