Brake brakes Problems (drums)

[Xtreme2Pathfinder]

Its been a long times guys,

But i have a problem with my rear brakes, mainly the pins that hold the shoes to the housing (they are calling them anti-rattle pins). so far all the pin that I have purchased have been too short. I have cleaned all the rust around the outside and inside the brake housing and even cut down the spring but I very have enough room to get the retainer clips on. I have never had problem installing brakes on a rear of a vehicle but this one is a mother, any suggests? Do they make a special pin that I dont know about. the shoes are stock 2.25" wide and the pins are about 1.75" long (from bevel to front side of the catch).

Edited November 19, 2008 by Xtreme2Pathfinder