blamtro Posted June 20, 2007 Share Posted June 20, 2007 I am getting ready to tear into my 4x4 transmission before I finish my 4x4 conversion mainly because I wasn't impressed with the condition of the fluid when drained and it had 131,000 miles on it. I have purchased a Trans-Go shift kit, a master overhaul kit and a ATSG trans manual. I also have the FSM. I have searched dar intarwebz but can't find much help or any info from people who have done this before. I have already addressed the cooling issues by adding 2 huge coolers, a remote thermostat to control the coolers, a remote filter, and completely bypassed the stock cooler and radiator. Link to comment Share on other sites More sharing options...
5523Pathfinder Posted June 21, 2007 Share Posted June 21, 2007 Stay clean! any kind of dirt or lint will cause issues. I actually rebuilt one at Nissan training and we used lots of brake clean and lint free cloths. Be sure there are nno grooves or nics in the case. Oh yeah, be careful! Link to comment Share on other sites More sharing options...
El Pathfindero Posted June 24, 2007 Share Posted June 24, 2007 uh......take it somewhere? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now