QXRover Posted February 14, 2007 Share Posted February 14, 2007 I have had this happen a few times this week, and ONLY at start up. The brake pedal is pretty solid, it will move about 1/8" inch and that is it and with little to no braking power. After kicking down on it a few times, I get pressure and the brakes then work. The pads are well over 60%. The brakes were all anti0seized recently. The only thing that was not done was the fluid replaced. Any suggestions? Vapour lock? Water somewhere in the line? Thanks Link to comment Share on other sites More sharing options...
Simon Posted February 14, 2007 Share Posted February 14, 2007 My guess would be water in the lines. I'd have the fluid changed out. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now