Search the Community

Twelve years of owning an R50, and almost 28 years owning and working on Nissan trucks (and cars, briefly)...and I'm just now getting around to putting together something like this. Still seems like people are trying to keep these trucks on the road, so hopefully this helps. This is a current matrix of maintenance and service parts for the R200A and H233B axles/differentials found in R50 Pathfinders and JR50 QX4. It covers all basic parts like seals and bearings, providing the current Nissan part number, superseded part numbers, quantity used, and a few suitable aftermarket part numbers. It also indicates which parts are No Longer Available ("NLA") from Nissan; they might still be available from international brokers and suppliers like Amayama.com and Partsouq.com. This list (particularly the aftermarket part numbers) is not comprehensive, but should be a good starting point; nearly all of the parts listed have a confirmed cross-reference to the OE part, some I've personally used. RockAuto's part number search DOES search across interchange numbers listed on parts; enter the OE part number without hyphens (i.e., "3818921G17"). There are definitely other parts that will work, especially more-affordable options; compare the specs of a listed part to other parts. It does not include any differential parts, LSD parts, or parts that would be needed to set up gears like shims and spacers...the majority of those parts are completely unavailable. The best option if wanting to change gears is to source a complete 3rd member or entire front differential from a donor vehicle, and service it using the parts from this matrix. Due to the nature of the high-pinion R200A we have, there are NO aftermarket gears available for it. Again, this is SPECIFICALLY for R50 trucks only. Other R200A front differentials (like those from W/D21, W/D22) do use some of these parts, but not all. The H233B data is for 33-spline only. Again, some parts do interchange, but some do not (mainly the inner seals and outer bearings which are sized smaller for 31-spline shafts). Keep in mind replacing many of these parts requires access to specialty tools, like pullers and a floor press, to disassemble and/or assemble components. Most of these parts cannot be bashed off, and some rental tools at your local auto parts store may be insufficient. A clamshell-style bearing puller like this works great for pulling pinion and carrier bearings. The matrix likely applies to foreign Terrano and Regulus models, too, but do your homework because you know Nissan did some really dumb things with these trucks. Part R200A (R50 Pathfinder ONLY) H233B (33-Spline ONLY) ! Qty OE Part # Supersedes NLA Aftermarket Part # ! Qty OE Part # Supersedes NLA Aftermarket Part # Pinion Nut 1 38216-U301A 38216-U3000 1 43262-50A0A 43262-50A02 Pinion Seal 1 38189-21G17 38189-21G15 38189-21G16 Y SKF: 15882 National: 710591 Timken: 2011S 1 38189-C7123 38189-C7021 38189-C7023 SKF: 16468 Schaeffler: SS2722 National: 710245 Timken: 710245 WJB/InMotion: WS710245 Outer Pinion Bearing 1 38120-1320A 38120-13201 Timken: 32306 WJB/InMotion: WT32306C SKF: BR32306 1 38120-1320A 38120-13201 Timken: 32306 WJB/InMotion: WT32306C SKF: BR32306 Inner Pinion Bearing 1 38120-61000 National: 32307 SKF: BR32307 Timken: 32307 1 38120-76500 38120-7650A National: 32308C SKF: BR32308 Outer Shaft Seal (LH) 1 38342-N3100 38342-P9000 SKF: 550231 Beck/Arnley: 0523506 Timken: 223542 National: 711070 A 2 43232-42G10 43232-42G00 National: 710176 Beck/Arnley: 0523492 SKF: 22120 Timken: 710176 Outer Shaft Seal (RH) B 1 40227-31G00 National: 710398 SKF: 19689 Schaeffler: SS3016 Axle Shaft Bearing (LH) Not Applicable 2 43210-0W000 SKF: GRW190 Mevotech: H516005 Beck/Arnley: 0514115 BCA: WE60346 National: 516005 Schaeffler: 101836 GMB: 7500024 Axle Shaft Bearing (RH) B 1 43215-H5000 43215-22500 43125-H5000 Y WJB/InMotion: WBRW114R Timken: RW114R National: RW114R Duralast: RW114R Axle Shaft Bearing Collar (RH) 1 43255-H1000 43255-18000 Y Not Applicable Inner Shaft Seal (LH) Not Applicable C 2 43252-0W000 Timken: 710479 National: 710479 Beck/Arnley: 0523727 SKF: 14782 Centric: 417.42011 Inner Shaft Seal (RH) 1 43252-H1000 SKF: 550232 Timken: 1181 Carrier Bearings 2 38440-N3111 National: 30209C Timken: 30209C BCA: NB30209C 2 38440-60000 Y National: KC11445Y SKF: KC11445Y Timken: KC11445Y WJB/InMotion: WTKC11445Y Differential Gasket D 1 38320-21W00 38440-N3110 38440-N3100 Y NONE - See Notes 1 38320-T3322 38320-T3321 38320-T3320AS 38320-T3320 O-Ring - Side Shaft Bolt (LH) 1 38223-21000 33125-Z5002 Not Applicable O-Ring - Outer Axle Tube Not Applicable C 2 43085-42G00 Beck/Arnley: 052-3568 SKF: 42G00 Fill Plug 1 00931-2121A 00931-21210 00931-21200 1 00931-2121A 00931-21210 00931-21200 Drain Plug 1 32103-U840A 32103-U8401 1 32103-U840A 32103-U8401 JPG version ! INSTALLATION NOTES A Axle shafts must be COMPLETELY disassembled (ABS tone ring, bearings, bearing cup, etc.) in order to replace the outer axle seals. This process requires a suitable tool and/or press. These seals are mainly grease-catchers for the bearings. However, if the inner seal is leaking gear oil, it likely has compromised the bearing grease. Axle shaft tear-down is recommended to regrease the wheel bearings and replace the seals. B Replace the RH outer shaft seal, outer bearing, and bearing collar together. The bearing shaft collar MUST be destroyed-off with a cold chisel BEFORE the bearing can be removed, and before the seal can be replaced. Attempting to pull the side shaft with the collar installed WILL destroy the flange plate (38232-01W00) and bolts. Ask me how I know. The "RW114R" kits all include a bearing and new bearing collar; the seal is sold separately. A slide hammer is needed to pull the shaft from the bearing, and a press is required to install the bearing and bearing collar on the shaft. C The axle shafts must be completely removed from the axle in order to replace the inner shaft seals and outer o-rings located at the ends of the axle tubes. This requires disconnecting the parking brake and hydraulic brake lines from the drums. The axle shafts will rest on seals, and potentially damage them, when the axles shafts are only partially pulled from the differential. FSM says to remove the ABS sensors from the axle tube to avoid damaging them when pulling the axle shafts. D The R50 Pathfinder uses a 9-bolt R200A differential only found in E50 and E51 platforms. All other R200A, R200, and C200 differentials found in other Nissan trucks and cars have 8-bolt covers. There are NO aftermarket gasket options for the 9-bolt differential.