SLOVAK69

Well, I got a couple turns out of those gasline clamps. Problem solved! Thanks guys!

It happens just like you said delavoie. After a couple of minutes, it stops doing. it. so you said you just tightened the clamp, and the problem went away? Is the clamp after the soft fuel line from the filter to the manifold? or are the other clamps buried way deep under the intake manifold?

Last weekend I put in new sparkplugs and tightened the throttle cables on my paythfinder, and ever since, I get a very strong raw gas smell when I start it up. after I drive away, I cant smell raw gas anymore. It not me producing the gas...petroleum gas. could I have the throttle cables to tight? What is the recomended tension on those cable? Try and see? much more power with the new plugs, but the old ones were dead. thanks

when I try to lift the latch, noting happens. Last week i could open the rear door, now I get nothing when I lift the latch. Im guessing its either something internal. Maybe the links inside have come apart? I dunno. Has this ever happened to anyone else?

My rear door latch seems to be broken. Is this a common problem? Is there somekind of safety switch im not familiar with? Thanks

I m having problems with my highbeams. The low beem works on both lights, but when I switch to high beams, the drivers side high beam cuts out. I just replaced my drivers side light assembly, including bulbs both sides. Im guessing its a faulty connection or blown fuse. Has anyone had this problem before, was it an easy fix? Also, where are the fuses for the light circuit? I checked the one under the dash and the fuse box under the hood, they looked all ok. Am I missing something?

Same thing happened to me, rear gate latch.

Has anyone out there done wheel bearings in thier pathfinder on thier own? Do you need any special tools? I have a 94 pathfinder with some play in the front end, thaught it was the lower ball joints, turns out its the wheel bearings. I have access to a fairly good shop, im just wondering if its worth my time to do it or not. Any comments?

What kind of HP gain did you guys get with the new K&N air filter? Is it worth it?

Yeah, thats kinda what I thaught. I put 4 litres in it after the last oil change, and it seems to be doing well. The dipstick was hard to rear because the oil was so clean. Thanks

How much oil (in Liters) does my Pathfinder take. Its a 94, V6. Thanks