Gents, I am a long time pathfinder fan! I have had 2 1995 SE's with suspension and body lifts and I love them.
recently I trading my 95 pathy for a 2003 Qx4. I bought it with higher mileage (80k) but It runs and drives silk.
I am very familar with the mechanicals but I am stuck on a vibration issue I can't seem to resolve. At a dead stop, then
starting off hard I have a vibration threw what feels like the drivetrain at 3500-4000 RPM (peak torque). It is smooth if I starting off easy, and when I hammer it on the highway. While moving there is no vibration at all, even if I hammer it, ONLY from a stop getting hard on the gas (my normal take off). I had it on the lift and sullivan tire just put 4 new tires on, flushed the tranny with full synthetic, and I changed the rear diff fluid. Its still there. I also checked the U-joints and they are tight as well? I brought it to infiniti and they told me the trailing arm bushings were gone, last night I went under the truck to check and everything seemed very tight on all links? ? Any ideas? There is a little play on the lower control arms, does the truck have to be lifted to check this? I don't see how an 2003 could need bushings already?