JackD

Thank you for your help! I ended up finding a whole new used ECM, installing this week along with the new idle control valve. Thanks again.

Hello all, I have a 2002 Nissan Pathfinder and unfortunately my idle control valve went bad and blew out my ECM. I would like to purchase a new one and have found quite a few on eBay, but they all have different serial numbers and I am not sure how to determine which to purchase. Has anyone replaced their ECM before that can help me out with this problem? Thanks in advance.

Hello everyone, I ordered some AC 2 in lift coils yesterday, and one of the employees just called and informed me that they only have one coil. They wont have more until the end of next month. I would really like to get the lift on so I could get larger tires on, and so I was wondering if anyone has some AC coils laying around or if there is a good alternative to these coils. I ordered land rover 9449s for the rear, so I don't really want to do oem because of the rake. I also would like to get a front bumper eventually so the front would be more weighed down. Any insight would be appreciated!

Sounds good, I just ordered all the parts. Thanks for your help!

Great, thank you very much.

Hello everyone, I need help in lifting my 2002 pathfinder. I have decided to go with 2in AC springs in front and land rover 9449s in the rear. Here is the parts list I have assembled so far: 2 in AC Front springs: https://www.4x4parts.com/i-18981165-pathfinder-front-lift-coils.html Camber Alignment Kit: https://www.4x4parts.com/i-18981303-pathfinder-camber-alignment-kit.html Front struts KTB excel g 335032/335033: https://www.amazon.com/KYB-335032-Excel-G-Gas-Strut/dp/B000C42QYW and https://www.amazon.com/KYB-335033-Excel-G-Gas-Strut/dp/B000C44C30 Rear springs nrc 9449: https://www.lrdirect.com/nrc9449-coil-spring-90-rear-lh Rear shocks Bilstein 5100s: https://www.4x4parts.com/i-18981408-pathfinder-5100-series-bilstein-rear-shock.html I have seen on the forum that I might need some other accessory parts, including front strut mounts and strut bearings. I am just confused as to which parts I would need. Would you guys help me out and tell me what other parts besides the ones on my list I would need to get? And if you could post part numbers or links that would be amazing. Thanks for your help.

Yes, after a little more research I think I will go with those. Thanks!

Hello everyone, I am new here, I just picked up a 2002 Pathfinder with 100,000 miles, and am wanting do some upgrades to it. I have been researching various shocks and I would like to do a 2in lift all around. However, I would also like to get a offroad bumper and winch in front as well as a rear bumper with a tire mount. I do not want the front to return to stock height when I put the bumper on. What would you guys recommend for a front end suspension set up to prevent this? Thanks, Jack