MLML
-
Posts
52 -
Joined
-
Last visited
-
Days Won
2
Content Type
Profiles
Forums
Calendar
Posts posted by MLML
-
-
Will post some photos once done. I’m probably going to weld some more support pieces on these to beef them up a bit.
Sent from my iPhone using Tapatalk- 4
-
Going on this week! Any advice?
- 1
-
Thats the one. Just need a set of feeler guages to confirm some specs. I want to say the gap on the unit shouldn't be more than 0.014" but its been a while since I installed mine.
Do you already have manual hubs?
I’m going to do manual hubs at the same time. Thanks!!
Sent from my iPhone using Tapatalk- 1
-
Just a double check guys. I'm planning to order this Lokka for my 2002 QX4. Any issues I need to be aware of?
Part number NIS-FO-293 on the Lokka site.
- 1
-
Yep! I put LR springs and Bilsteins on the rear, giving about 2.5" of lift. I have a 2" spacer on the front now, but next week KYB/OME springs with 1" spacer. I have skid plates on now and rock sliders are coming next week, along with manual hubs. Lots to do! I actually bought that QX4 brand new in 2002 and never drove it very much, so it has pretty low miles on it. The benefit of a California car, especially where I live and it's almost always 70F, is no rust, leaks etc. It's technically my 16 year old son's truck now, but I'm having fun working on it.
- 1
-
I have a 2002 QX4 with LSD axle. I may start with a Lokka in the front with manual hubs, then do the rear later. Any issues you see with the QX4 variant?
-
1 hour ago, TowndawgR50 said:
That wont work on any R50 unless you swap over to a 31 spline setup. All R50 H233B rear axles are setup with 33 spline.
The 31 spline swap has been done and @hawairish documented the steps and parts needed.
Thanks! Probably easier to just swap the axle.
-
Anyone put one in their Pathy? Looking at maybe doing this one in my 2002 QX4.
https://www.4x4parts.com/i-18915694-complete-detroit-locker-assembly.html
-
Just now, cgriff said:
Sorry to say not enough interest. I guess we will have to go it alone.
Sent from my BLA-A09 using Tapatalk
No problem! Thanks for trying!
-
Is there a group buy going on? If not, I will order one off eBay.
-
The QX4 boxed in by Jeeps!
- 2
-
-
16 minutes ago, deltaR50 said:
btw how long it took the items to get to your door? im interested now after seeing that in person.
It took about 2 weeks from the time I ordered to arrival at my door.
Great meeting you today! Thinking about the SFD and 6 inch lift......
-
Nice meeting Delta R50 today at Hollister SVRA!
- 4
-
I'm in for one of the $50 Chinese snorkels.
-
Man I wish I had some of these! They look super nice
Hit up Steve. Awesome guy, great product.
Sent from my iPhone using Tapatalk -
You know, your transfer case looks awfully wet. Got a leak?
I'm jealous of how unbelievably rust-free your undercarriage is!
California car! Never seen bad weather, basically no rust anywhere.
I just changed the transfer case fluid.
Sent from my iPhone using Tapatalk- 1
-
3 minutes ago, Sjackson2 said:
Anybody got a set of 2 inch front strut spacers they’re not using anymore they’d be willing to part with?
I will likely have a front/rear set in the next couple weeks. Replacing front struts and doing 1" on front, LR springs on rear no spacers.
-
Yeah, I just keep a couple extra bolts/washers/hose clamps/zip ties for general purposes.
-
Awesome skid plates and customer service from Steve! Can't wait to skid on them!
- 3
-
Land Rover Springs and 5100's in the rear. El cheapo struts and 2" spacers in the front, about to be replaced with KYB/OME HD and 1" spacers.
- 3
-
3 minutes ago, PathyDude17 said:
a lot of people seem to get about 1”-1.25” out of OME HD springs if they have no extra weight
If I plan to put on a metal bumper/winch maybe I should go with the 1.5" spacer?
-
Just now, PathyDude17 said:
Yep. Don’t put on the trim packer. If you put the 1” spacer on top of OME springs like that you’re looking at about 2-2.5” of lift
Fantastic! That's what I'll do.
-
5 minutes ago, PathyDude17 said:
The OME HD springs plus a 1” SF creations spacer is a great, safe setup. Multiple guys run it, no report of CV issues
The 1" SF spacer would take the place of the Trim Packer? How much lift would I get with the 1" SF and KYB GR2/OME HD's?
Land Rover rear lift spring install
in 96-2004 R50 Pathfinders
Posted · Edited by MLML
LR 9448 springs (one coil removed) with Bilstein 5100's in the rear, KYB struts and OME springs in the front. About 2.5" of lift.