drifter

Do they sell the 4x4, 4 bangers in the u.s.a. ? i have never seen one for sell??

I want to install some lights,KC, rally style etc.. on my front bumper 94 path , I need better lighting and i dont want to intstall a bumper guard. Anybody have this set up ? and what are the best type/brand lights to go with? any pictures ???

I replaced the pipeing all the way from the header back , The 40 series is a little loud. but when i threw on my 32/11.50 's it kind of helped dont ask me why, maybe the larger diameter tires got rid of the exhaust drone on the frwy. Or it could me the M/T tires have there own sound as well. You might want the 50 series, a little less in noise i am told.

I just installed Thorley headers,2.50 exhaust 40 series flo master, i still debate if i should of gone with 2.25 piping ?? I got a regulat catco cat, go with a custom exhaust hi flo cat, anfd you decide on piping. I am happy with my 2.5 i just wonder if 2.25 would of helped a little more. ????

right on thanks for the info, i think i will crank them up just a little.

94 path 4x4 calmini 3in. suspension, As of now the back sitts a lot higher than front, how far can i crank those torsion bars before the ride suffers ??,right now i have almost an inch before it hits bump stops, should i crank them up about another half inch ?? should i shave off a little of the bump stops in front ?? or leave them alone..

I stand corrected, after installing my 32/11.50 M/T i think i am likeing my 40 series now , the tire humm drowns out a little of the drone from the muffler, And i need all the power i can get now pushin those bigger tires.

yeah , i just dont want tp spend the cash and time for the 50 if its only a slice quieter, what about magna flo , dyno max etc.. ???

Ha HA , :tonguefinger:

94 path 4x4 thorley hedders, 2.5 exhaust w/ 40 series flo master,regular cat, The flo- master sounds great street driving but on the freeway its a little annoying. Is there another muffler i could swap in thats a little less loud but still holds performance ??

So whats the best hi-flo unit out there ? and where do i buy ? any where on the internet that sells them ?

I was talking to a guy that owns a exhaust shop and he said the hi-flo cats where no different than a regular cat ?? It was just a marketing sceme.

My tweeters are crackling , wanting to dis-connect them, whats the best way to get to the tweeters so i can snip those wires ,behind the dash or can i get to them by breaking down the a-pillar. whats the best way with out making a mess ?? thanks

94 4x4 path 5 spd , 2.5 exhaust 40 series flo-master/Thorley headers. Was thinking of swapping out my cat for a test pipe, my question is will the test pipe upset engine light, back pressure etc... and will i gain any hp. or gas mileage ??

Looks like you have to jack it up and go thru the wheel well ? Do you have to remove the wheel.?

Will i be able to install the relo kit and work around the headers with out removing them, I hope so cause them headers wern't easy. Thanks,

I have my thorley Headers installed and now i have noticed my oil filter is going to be hard to get to , ?? anybody have this problem as well ?? 94 4x4 5 spd path,

I am almost done with my cal mini 3 in suspension lift and calmini steering kit { 1994 4x4 path 5 spd thorley headers 2.25 exhaust }, 15x8 5 in. back space rock crawler rims , ?? Do i go with 32x11.50 or do i go with 31x11.50 ?? i know the 32's will look good but will my performance take a dive, like rubbing issues, kill power, not be able to go off a curb with out bending the fenders etc... 31x11.50 plenty of clearence , ??? What would you do ???

your very lucky to have found just 1 , I was very lucky also and i found 5 .

Installed Thorley headers, what is the best type of clamp that i need to marry the joints ? mega clamp 2in. lap joint ? There was a thread a while ago , i searched and no luck. What size,kind & where ?? Almost got this thing together after 5 broken studs @#@!!.

Are those M/T 31x10.50 or 31x11.50 ? Nice.

Thanks, Yeah that does not sound that loud, i will be adding thorleys to the mix,.

My thorley headers are going to be done next week after we drill out one more stud,then i am going to the exhaust shop.what flow master 40 or 50 muffler and what size piping should i go with ??

Has anbody tried EBC brake pads ? supposed to work well. not sure about the price .

right on thats good info, Thanks