Hey all,
I'm having some issues with my '95 SE. It's automatic, 4wd, VG30E, etc, so on and so on........ I recently developed this issue and I had figured after pulling the codes, that my issue was replacement of components so I went to the boneyard and picked up a new computer, mass airflow sensor, coil and coil amplifier as well as a distributor, all based on posts from the site. the truck will turn over but it wouldn't start, or so I thought. I replaced each item and tried to start and each time I had no luck, I replaced the old component, with the exception of the vehicle computer, because the truck seemed to run stronger once it started. Here's where it gets crazy: once it started, I took it for a ride and I've found that the vehicle's engine "skips" with almost every bump I hit. every so often, it will stall, or not start when necessary. I'm suspecting the spark issue is intermittent, causing the stalling and nothing else because that was the problem when it wouldn't start before. My question is: are there any particular places common to this issue that I should look at to find the fault in the wiring for this? I'm from Florida, working in Detroit right now and I HATE the cold! That said, I'm trying to spend as little time as possible under this thing!
Any help would be greatly appreciated.
Thanks!