[rear bumper end caps]

Anybody? 

They re-pop the front end caps...they're on Ebay.

What about the backs?  

There has to be demand?

I'll buy 2...lol

[rear bumper end caps]

Any body know where to find rear bumper chrome end caps?

[Source for 95 Pathfinder spare tire cover exterior rack]

Thanks,

Andy

[Recommendation for hood bug stone deflector shield]

Thanks.  Looking for a recommendation for a good one...good design, durable, etc.

Andy

[Source for 95 Pathfinder spare tire cover exterior rack]

Source for 95 Pathfinder spare tire cover exterior rack.

Looking for a source for an OEM style spare tire cover for exterior rack.

Thanks,

Andy

[Recommendation for hood bug stone deflector shield]

Looking for recommendations for a good bug stone deflector shield for a 95 Pathfinder.

Thanks

[Trailing arm bushings (rear)]

Energy suspension 7.3120 says its for rear control arms '95 Pathfinder. Anybody use these for the rear trailing arms/control arms on a '95

[Front suspension...what to replace...remote vehicle]

I need to do some work on my suspension...95 SE 4wd

My vehicle is in a remote place so I was going to just take a stab at what parts I might need...

It has 90K miles and is stock/original.

 

Any input would be appreciated...

 

I'm thinking of tackling these parts first...

 

Front:

Front lower control arm bushings (is alignment required if I do these and tie rods are okay?)

 

Inner and outer tie rods (if needed but will buy to have handy-alignment required I know)

 

Strut rod bushings

Sway bar bushings and end links

Steering damper bushings

Shocks

 

Rear:

Trailing arm bushings

Sway bar bushings and end links

Panhard bushings

Shocks

 

Zerks and lube anything that takes zerks (factory)

 

 

I was going to wait and check the ball joints and upper control arm bushings as I think they are more involved and they may be alright. Also waiting on springs and shackle bushings...to see what the impact the above has first.

 

Does it make sense to do it in steps like this? Any suggestions?

 

Thanks,

Andy

[Trailing arm bushings (rear)]

Thanks

 

[Trailing arm bushings (rear)]

95 pathfinder 4wd SE

Who makes trailing arm bushings...

So far found Whiteline for $70 per side is that the best option?

Can they be pressed in with a vice or do I need a shop press?

 

[95 WD21 Muffler]

Thanks. Andy

[95 WD21 Muffler]

I am looking to replace my muffler with this Walker 18321. My Pathfinder is in another location so I cannot examine it.

It looks like the front bolts on to the catalytic converter (flange below).

 

Does the back bolt up or is it welded to the remaining tailpipe?

 

Thanks for help.

 

Andy