Skib
-
Posts
43 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Calendar
Posts posted by Skib
-
-
should bolt up to the stock trans right?
-
Will the VG33ER mount in the WD21 with either the 33er mounts or the stock 30e mounts?
Just working out if I go about picking one up and building it if Im going to have to fab up
the engine and trans mounts or not...
-
soaked plugs means an engines getting fuel and no spark... "flooding"
if there wet enough to not start you let them dry out... its gas, it evaporates fairly quickly.
if you have spark your good to go.
-
VDO gauges are awesome. FYI I know some stock WD21/D21 clusters are compatible with VDO inputs and outputs.
Iv always been favourable to VDO, I ran them in my old SCCA car.
there generally very well priced too, which is great when you race on a budget.
-
where did you tap your vac line into path?
-
Awesome thanks for the close up and link to the calculator. Do you have a link where you bought this? I was looking into doing this mod but can't find a gauge I like.
summit racing carries that gauge.
and I picked this one up from Napa
-
1
-
-
oh yeah, we know its getting fuel because the plugs are soaked..and we know its getting spark because we keep getting shocked, as one of the coil wires seems to have a crack in it.
when you do get a new starter make sure to pull a plug and check its actually sparking there.
spark at the coil and even the wires doesnt always mean its sparking at the plug.
-
well if its backfiring out the exhaust side then that tells you the timing is to retarded
-
You might be surprised at how well the stock set up flows, it is only a 3.0l. Exhaust and cams are a given, but other than a larger filter or whatnot, the stock intake will probably be sufficient.
lol Im trying not to get to carried away on this one
but someones I cant help it.and Im used to 2k lbs cars that will kick the ass end out on the freeway
stock it still pulls pretty good but it can always be better, the VG33er supercharger is an option too.
or if I get really carried away I could just build an all new VG33er to swap in. who knows lol
Sorry about the missing Admin buttons, but I suspect it is nice not to have them as well...
B
hahaha on a forum with ~14,000 memebers its deff a full time job occationally.
its got a very well built community around it so I dont usually have to step in to often.
lol but when @!*% hits the fan I dont just get a PM my phone starts ringing
-
You should start a build thread in the Members ride section
http://www.nissanpathfinders.net/forum/forum/53-members-rides/
just snapped a bunch of pics to get that started.
usta live in medford btw lol my brother in law works for tucker sno cat
-
Wow, Datsun heaven! A couple of those look familiar, I've either seen them in mags, on the web or at the Datsun meet that used to be held at Met Shasta.
youl see the coupes around norcal for sure, the shop pics are from when I was in the Sac area.
and we always hit the big eagle rock LA meet.
-
Love classic cars and those are awsome projects, I like what you showed a lot.
thats just the tip haha but Im an admin over at Ratsun.net and its a brothel of picture whores
so everything always comes with lots of pics
lol we use the same software so I keep looking for my extra admin buttons
not used to them being gone. -
Wow, Datsun heaven! A couple of those look familiar, I've either seen them in mags, on the web or at the Datsun meet that used to be held at Met Shasta.
there was one that came out in like modified mag a few months ago that was a blue/purple SR 510 that we painted a while back.
some of those cars have made the round too haha
That Z
.my most missed datto
Welcome...very nice rides...Ill be looking forward to your Pathfinder build if it will be like your other builds.
lol Im tying to clean up the defects atm but I know better, I cant leave things stock for too long.
the VG deff needs a new intake fabbed up, better exhaust and some cams at the least.
has the typical rear pass exhaust stud leak but other than that runs tip top.
I just scored most of the stuff I need to fix the little things at the yard today.
Ill have some more pics of the pathy up a bit later.
-
Looks like you've had quite a few projects. All beautiful projects. Welcome to NPORA!
lol theres always somthing.
just down to the new pathy and this atm... (as far as personal rigs go)
Iv got some fun customer stuff coming up tho,
an RB powered Z and a guy who still decideding on VQ or 2JZ swap for his Z
Picked the pathy up with 173k on it with the timing belt service done 1k ago, lol one less thing Iv gotta do.
Ill eventually get around to fabbing up some new exhaust and getting a bit more out of the VG
for now Im just cleaning up some things, making a trip to the nopo yard tomorrow.
-
-
A little bit of what I normally have my mits in....
-
1
-
-
Just picked up a 95 pathy for the new shop/tow rig.
I generally build classic japanese stuff (Datsun/Toyota/Mazda)
haha so its been a loooong time since Iv owned anything this new.
VG30 5 speed 4x4
VG33ER mounts?
in 86.5-89 WD21 Pathfinders
Posted
Thought so but wanted to double check.
Its a 5 speed so all good.
Once I get some other projects out of the way I think my pathy needs a VG33er lol