- Sign In Changes: You now need to sign in using the email address associated with your account, combined with your current password. Using your display name and password is no longer supported.
- If you are currently trying to register, are not receiving the validation email, and are using an Outlook, Hotmail or Yahoo domain email address, please change your email address to something other than those (or temporary email providers). These domains are known to have problems delivering emails from the community.
Caleb
-
Posts
5 -
Joined
-
Last visited
Content Type
Profiles
Forums
Calendar
Everything posted by Caleb
-
my biggest problem was I couldnt get my fan shroud out... couldnt get it past the fan itself. so I said screw it, and just worked around it..
-
well got it done... after about 8 hours.... would have had it done in prolly 5 but the stupid liquid gasket crap didnt seal the first time, so I had to pull most of it apart for round two. ah well... its done now... purrs like a kitten so far, will see how it runs now for the next few days...
-
Well after researching the site a bit, I found a few threads about replacing thermostats, however they all seem to say something a little different. I have a 92xe v6 model, now some say the the tstat is off the upper rad hose assembly, and others say its off the lower assembly. Also I have read you need to remove the belts to get at it all. I just wanting some clarification on where it is exactly and if I need to remove the belts/shroud and what not. also I am hoping this will resolve my weird idle issues. The idle will flutter a lot, to a point where it will stall when coming to a stop. because the engine wasnt warming up properly, I put a piece of cardboard in front of the rad to warm it up a little better, I know band-aid fix, but I get proper heat now, but it seems to have the idle issue after I did that. I would only flutter once the engine was warm, at cold idle its fast and consistent.