tack610

Ok so i did the relay "fix" and got it to work that night. Took it out for a drive and came home but parked the car on the street. After a few hours of working on another car i got back in mine to drive it up in the driveway. Nothing, not even clicks, im back to square one. Again for reference starter and battery have been tested as good. All the wiring has been tested but not voltage tested (i dont have a volt meter) and im still stumped. Is there a way it could be my ignition relay? That's the only thing i can think of that might be wrong.

Ok, so to start off I have a 1990 Pathfinder Xe V6 Automatic 4WD About 6 months ago I couldnt get my truck to start. I got a re-manufactured starter from autozone, took me 2 days to replace the Bit** but i got it done. Everything was good. A couple weeks ago my starter wouldn't start again and because i Live in AZ, during the summer i really didnt want to work on it. Because i live with my parents I used there cars for the summer. Well, 2 days ago i started to work on it because school is starting in a few weeks and i need the car for that. I couldnt get it to start again, so i took out the battery to get it tested. It was bad so i got a brand new one. Ive tested the wiring to and from the starter with a test light and i got power to the starter when i tried starting it and power from the starter when attempting to start it. But nothing from the starter. So, today i decided i would hunker down and take out the starter. After draining the oil and about an hour of tug and pull i got it out. Since its re-manufactured i suspected the starter was bad so i went to Autozone and had it tested. The put it through the paces 4 times and it passed each time. I dont know what else could be wrong. When I tried starting it before i took the starter out i got no noise whatsoever. No clicks, no chugg-like noise nothing. I'm stumped and so is the most mechanically inclined people i know. Any help would be awesome. Joe