Jump to content

clkindred

Members
 View Profile  See their activity

  • Posts

    346

  • Joined

  • Last visited

  • Days Won

    2

 Content Type 

Posts posted by clkindred

    1996, 5 Spd doesn't idle when I depress clutch, (help, before i take it in)

    in 96-2004 R50 Pathfinders

    Posted · Edited by clkindred

    Well, you say it won't idle and acts weird, can you elaborate? Dose it idle fast? Slow? Dose it stumble and miss? For troubleshooting vacuum leaks you can take a can of starting fluid or brake cleaner and spray short spirts on vacuum lines, intake gasket area and such and if there is a leak the engine will rev up for a second or two when you hit the culprit.

    hello from canada

    in New People Start Here!

    Posted

    Welcome! Head on over to http://www.nissanpathfinders.net/forum/forum/67-r50-faqs-pinned-topics/ for a wealth of info, should be everything you need to know.

     

    The R50 IS a capable wheeler sock, I recomend plenty of hunting/fishing and bush camping trips while it its stock so you know where to go with your mods. The first time I took my pathy "wheeling" was with a buddy in the snowy winter mountains, I was astonished what I could get through in my stock pathy and it was probably the most fun I have had in it.

    snake racing spacers lift

    in 96-2004 R50 Pathfinders

    Posted

    No takers yet? Well I did some googlin' and found http://store.snakeracing.com.au/~snakerac/advanced_search_result.php?keywords=R50+coil+strut+spacer are these that you are talking about?

     

    They look like a simple strut spacer along the lines of these http://www.nx4industries.com/ which have done well from what I have heard. Although they are not usually a standalone lift, but a way to enhance a spring lift, though if the spacer alone gives enough lift for you than go for em'

     

    I would think the spacers installed in the way that snake racing product describes "on top" than ride would not be changed from stock. I believe the NX4's can be ordered in an other configuration aswell as "on top" that would add preload to the spring making it ride stiffer.

     

    Either way you have to ship them from outside the US, so either Australia or Canada.

    General questions

    in 96-2004 R50 Pathfinders

    Posted · Edited by clkindred

    As for taking the finnish off the wheels for painting, it's not gonna be easy and I'm not sure if there is a way to totaly "strip" chrome off as you would any other finish. The mad scientist in me has me thinking perhaps an acid bath, or reverse engineering the chroming prosses to take it off. Giving it a good cleaning and then wire brushing or sanding/sand blasting to rough up the chrome so paint will grab is probably the best option. Coating the wheels in somthing called "plasti-dip" has some believers. Heck some people spray their whole car with it.

     

    Plasti-dip thread http://www.nissanpathfinders.net/forum/topic/32634-looking-for-new-wheels-recommendations/

    General questions

    in 96-2004 R50 Pathfinders

    Posted

    Well I will answer what I know.

     

    Many people have run 31's at stock height with various wheels and widths, including myself for a while.

     

    My stock 5 spoke alloys (although not chrome, more of a mate silver) were 5.75" backspace.

     

    The requirement for 3.75" backspace wheels according to AC is kinda not true, the lift will go on just fine with stock wheel backspace, it's the larger tires they assume you will be running that make that somewhat needed. If you can run your tire size without the AC lift, then you don't need different wheels.

     

    Camber bolts hehe, I bought 4 to replace all factory cabmer bolts on mine, after doing the lift I think I could have gotten away with 1 per side. They might not be needed, but trying to put your pathy together is a bad time to find out you do.

     

    As for the rest, I don't know.

    Help me! Lift issue

    in 96-2004 R50 Pathfinders

    Posted

    You installed the lift on the front only? On going over bumps this "nasty vibration" is it like a pop or bang? Any noise or vibration noticed when turning the steering wheel? What brand of replacement CV axle did you use? By "C clamps" do you mean the C-clip that retains the axle stub in the steering nuckle? If this clip were not in place properly it could do some very strange things I suppose. Pull the little cover off the hub and check to see if it is sitting down in it's groove. How's your wheel bearings holding up?

    Antenna removal?

    in 96-2004 R50 Pathfinders

    Posted · Edited by clkindred

    You will need to remove some of the wheel well plastic to gain entry into the fender. Then there is a little chrome "ring" at the base of the mast on the outside just on the fender's surface that partly attaches the entenna to the fender. Unscrew this part and remove it. Then on the inside of the fender, you will see just one or perhaps two bolts holding the servo motor/inner antenna assy. to the vehicle. Remove these aswell as the related wires and it will drop out of the fender. Hope this helps!

    New From Colorado

    in New People Start Here!

    Posted

    Hey you said you were 10 minutes from Garden of the Gods? My buddy also lives in that area, he had to evacuate because of the Waldo Canyon fire when it jumpped out of the canyon and spilled into town. He's back in his home now and all is well. Did you also have to evacuate? Hope everything is OK.

×
×
  • Create New...