jeffrhine

when we "crank up" his bars the whole truck gets lifted so I'm assuming we are cranking them up, but he could tell you better.

aaahhhh I've had my fogs on for around 4 hours straight, and I'm pretty sure nothing was getting hot. I even popped the hood and checked the wiring under there. I'll prolly through in a relay just incase to save money in the long run.

I've got three lights on the front with 14ga wire without a relay, and I haven't had a problem with blowing any fuses or wires getting hot.

Has anyone put aftermarket seats in, or would have pictures of it done? I'm thinking of throwing some bucket seats in there. I'm not very familar with seat rails, would another nissan seat fit into ours?

I'll also buy some! or if anyone else has some premade ones shoot me a PM

YUP! even cooler when it hits your face also! ahaha but yeah still gotta clean all that out (yesterday).

Mud, some coins, and a dollar bill.

So I took out the starter and did a test at shucks, and it failed. So I'll be putting the new one in tomorrow morning before I head out wheeling har har

Yeah it ran just fine after, and good thing I never turned my truck off up there! I'll go ahead and take it off now.

Couldn't find that fuse.. is it inside? because I don't have my cover for the inside so i'm blind

so if I did drown the starter can I just clean/dry it?

I might be getting one from that site soon wow I haven't come across that one.

yup!

just makes a soft click when I try to turn it over. It was that level around the whole truck, had to pull out my friends yota and he almost hydrolocked his truck

Do you think that would be deep enough from the picture? I might have went alittle deeper actually.

yup! just wondering why.. and I remembered being pretty deep.

Would this be enough to get water on the starter, and If it was is it true water can hurt that?

Anyone have any extra they'd be willing to sell? or could fabricate for me?

Can't seem to find a website that sells the attachments for Hi-jacks on our stock spare tire carries. Anyone have any sites? also pictures would be nice

I've come across some pretty big crossings, and I might just make one since its a cheap mod. I'd just have to drill that hole. :'(

I won't be doing any river crossings or anything heavy like that, But I do come across some pretty big "puddles". Just wondering how important snorkals are.

I actually found an amazing deal at this whole in the wall tire shop. 2 mickey baja claws for 150, and I'll just buy the other two from 4wheel parts and have them shipped for free.

Those aren't the wheels I have hmm I've got the crappier versions heh anyone know what am talking about

can't see it at work I'll take a look when I get home

best mod ever: rubber floor matts