curlybare
-
Posts
4 -
Joined
-
Last visited
Content Type
Profiles
Forums
Calendar
Posts posted by curlybare
-
-
Can you hear the motor trying to do anything when you change directions? If so your regulator cable is most likely twisted up. Mine snapped and you could hear the cables slapping around inside the door panel when trying to move the window.
The switch works fine. I can feel the cable moving in both directions with my finger. It just doesn't wanna go up. I think the cable broke (but then it wouldn't go in both directions,right) or came off the pulley or guide.
-
so if your sitting there parked and you rev the car up to 1200rpm as soon as u hit 1200rpm the light come on?
Yeah, it's strange ain't it. One thing I did do was pick up an alternator, I'll put it on this weekend. BUT, I got the 70amp one. I think I'll take it back and get the 90amp. ($132 compared to $84) I don't know if I need it, not running anything other then stock stuff. It won't damage anything will it?
-
My 90 Pathy has a strange problem the brake warning light on the dash comes on at 1200 RPM. Actually been that way for years. At first I thought it was low on fluid or the E brake switch was the problem, not the case, that would be too easy. Anyone else seen this?
Today I put on the 90 amp alt. and the brake light goes out as it should. I did check the brake cyl rubber gasket and it was fine. I don't know why the brake light would go on as it did but the new alt. fixed it. Could have been a short inside or brushes or loose connection. But for today it is cured. Yahoo, thanks for all the help guys.
change fuel injector
in 90-95 WD21 Pathfinders
Posted
Is it possible to change the #5 injector without removing the intake? I know it's that one, because if I pull the plug wire it doesn't make any difference. I had pulled all the plugs but that one is stuck. I don't want to snap if off. Any ideas to get it out, hot or cold engine, liguid wrench? I had the heads done 4 months ago and this all started shortlt after. He says it was the #6 injector but "not". He wants to do the whole thing for like $500. Not goeing to happen. Any help out there.