Jump to content

Moving To New Servers!


*Temporarily On Hold Due To Time Restrictions*


Members interested in helping test the new NPORA server platform, please contact RedPath88 via PM or email for further information.
Thank you,


Member Since 05 Apr 2014
OFFLINE Last Active Jul 26 2014 05:06 PM

Posts I've Made


11 April 2014 - 07:43 AM

I can only hope for 13 mpg on my 24 year old pathy... but you may want to check the catalytic... sometimes just a slight clog will ruin fuel consumption... my other guesses would be to do what you've already done... also, mileage depends on what kind of driving you do... if it's mostly city, you're lucky to be getting that much, if it's a mix city/highway, then that's probably about average... also a lot of hills will kill consumption... not much more you can do without tearing apart the engine and transmission and rebuilding both just for a few more extra mpgs... not worth the cost

Sent from my GT-I9500 using Tapatalk

In Topic: So... i saw my first WD21 pathfinder today.

09 April 2014 - 07:23 PM

And also has the contoured brush guard winch mount... my dumb ass thought it was a platform for fogs... now I must find a winch and remove the fogs I installed... lol

Sent from my GT-I9500 using Tapatalk

In Topic: So... i saw my first WD21 pathfinder today.

09 April 2014 - 07:17 PM

If you liked that than look here:

Loving this link bro... Now I know that I have the sport package for my 1990 SE... and almost every available option except for 2 tone paint... Thanks for the info :D

Sent from my GT-I9500 using Tapatalk

In Topic: Couple things wrong with my '92 pathfinder

08 April 2014 - 05:55 PM

Cheap fix for the squealing noise on new brake pads is lube on the pad, not the friction side, but the side the piston squeezes on it, duh lol... also, you don't necessarily have to do rotors in pairs, but from my experience with my pathy, a rotor that's been damaged and the other side is fine means an issue with the caliper... you may want to look into rebuilding it which is fairly straight forward and cheaper than buying a new or rebuilt one... had to change all 4 corners, 1 rotor and 1 caliper due to damage beyond repair... front rotors are a bitch to replace with the auto locking hubs...

Sent from my GT-I9500 using Tapatalk

In Topic: Push out stereo from dash

08 April 2014 - 05:32 PM

Posted Image
This is what I did with my Malibu instead of using a blank plastic spacer for the gap in the 'din and a half' space... mdf, some fiberglass and paint

Welcome to NPORA Forums


Please REGISTER to gain full access to the forum.


Make sure you read the Forum Guidelines and don't forget to post a new intro in the New People Start Here! section, to say hi too everyone.