Jump to content

qatcool

Members
  • Posts

    42
  • Joined

  • Last visited

Previous Fields

  • Your Pathfinder Info
    2002 3.3ltrs. V6
  • Mechanical Skill Level
    Screwdriver Mechanic
  • Your Age
    30-35
  • What do you consider yourself?
    Weekend Warrior
  • Model
    E
  • Year
    2001.5

Profile Information

  • Location
    Qatar
  • Country
    Qatar

qatcool's Achievements

NPORA Newbie

NPORA Newbie (1/5)

1

Reputation

  1. i have a code for knock sensor, can this cause this? when the engine is cold, it runs fine and shifts fine,but it get hots thats when the stumbling happens. even in neutral, when its cold you can rev up to 6000 rpm, but when its hot it only rev up to 3000 rpm and its start to shake. my 1st suspect is the MAF but a mechanic told me that it might be the fuel pump. is their a replacement MAF can you please give me the part code that fits VG33E.
  2. I need your advise. My pathy runs just fine at low rev between 1500 - 2000 rpm, as i step on the gas pedal, and it reaches 3000 - 3500 when it shifts it will shake, as i release the gas then the next gear will come, i have replace the fuel pump and filter nothing happened. when the whether is hot it does even at 2500 rpm. can somebody advide what look for the problem. can the MAF do this? distributor maybe? is my transmission failing?
  3. My 2002 R50 came with 3.3ltr. VG33, I believe VQ has 3.5 ltrs.
  4. have you replace the fuel pump?
  5. I know how you feel....just a thought, when my a/c compressor was change they have mistaken 2 vacuum lines in the canister. maybe you have swap the lines?
  6. Any change after replacing the MAF?
  7. While waiting for your truck to get fix.. so i can follow your lead, my a/c died need to spend 2000QR for the fixed.... my wife had enough of my pathy...
  8. Thank you for this information. if you can help me also for the knock sensor. and harness.
  9. Did you to nissan? can you provide me the part numbers? thanks
  10. My 2002 have a VG33, I went out lastnight to a mechanic, we observe even if i step on the gas pedal it wont rev up and it start to shake/stamble until i release the gas pedal then it will shift. he told me to check the catalytic conveter and remove what ever is in there. is this a good idea?
  11. I just got the code PO0325 knock sensor. will this fault can cause this? what happen when knock sensor fails.
  12. Will this fit in 2002 VG 33E engine?
  13. I have read somewhere here that they used a MAF from nissan Maxima, although the engine is VQ, can we use the same in our VG. Thanks
×
×
  • Create New...