Death wobble

[Rusty1967]

I need to know what bushings I need to replace in order to correct it, also if I should start with the front end or the rear end of the car. Any other helpful advice would be greatly appreciated. 

Thanks everyone, 

Rusty1967- Dallas, Oregon

[Mattmill91]

All 8 in the rear. 2 per control arm. 2 lower arms - 2 upper arms.

Front - control arms have 1 or 2- I found compete ones on rock auto for ok price.

I got the “white line” branded from summit. Good bushings. Cheapies from rock auto only lasted 1 year in particular some ac Delcos they fit but must’ve been for a sway bar not tough enough.

[Mattmill91]

Check out this page from Summit Racing https://www.summitracing.com/parts/whl-w61705a


Double check make sure I linked proper ones for the pathfinder.

[Mattmill91]

Rock auto shows control arms with ball joints for abojt $60 they are moog but they are $60

[AlwaysWrenching]

I bought a complete set from TRQ. They are made in Taiwan. All 4 control arms with new bushing for like $130. So far they have held up great.