SFD Camber Compensating Strut Spacer Help

[onespiritbrain]

So I've looked at all the drawings for the SFD 4in strut spacer with camber compensation and I don't feel comfortable my ability to follow what info and drawings there are.

 

I have searched extensively and haven't found a good detailed "how to" for the SFD strut spacers. Does anyone know of one that I might have just missed??

 

Does anyone fabricate them on this forum? Can you order just the SFD strut spacers from Krypton?

 

Thank you

 

 

Sent from my iPhone using Tapatalk

[onespiritbrain]

*cough cough fleurys cough*

 

 

Sent from my iPhone using Tapatalk

[TowndawgR50]

Take a protractor, set it to 8 degrees, mark a pipe, cut both sides parallel at 8 degrees to a length that will equal 4" after your plates are welded on (example- cut pipe to 3.5" if using 1/4" plate), copy the strut mount onto some plate and cut drill as needed and weld it all together making sure the orientation of the strut mount bolt pattern and the 8 degree slope matches your rig.

 

Sounds harder than it really is. Grab a grinder and a welder and go for it.

[fleurys]

*cough cough fleurys cough*

 

 

Sent from my iPhone using Tapatalk

LOL !