azdonald Posted July 26, 2016 Share Posted July 26, 2016 Does anyone know how to get it out of fail safe? (Limp mode) Started the other morning, 5 speed manual won't go above 2800 rpm, can still shift fine and get to 5th gear just won't go past 2800. Checked the diagnostic and got a 51 code (injector circuit) looking for specifics on that. was able to clear it and showed a 55 but still doesn't go past 2800. Idles fine,doesn't jump around still drives fine with the exception of the fail safe. 1989 v6 120k miles Thanks! Link to comment Share on other sites More sharing options...
azdonald Posted July 27, 2016 Author Share Posted July 27, 2016 Checked voltage on the 15 pin connector that goes into the ecu for the injector Only got battery voltage on 104/103 no voltage on 101/102/114 is it possible the safety relay could be bad or would it effect all of them? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now