check engine light came on yesterday after going through some water

[Cory74700]

im throwing some codes that i cannot identify, i know someone out there can so please help. i looked at another forum that had the codes posted but they meant nothing to me and didnt match mine at all, thanks in advance.

 

[Kingman]

You're doing it wrong. After the 3 quick blinks, turn the dial back and that enters diagnostic mode 3, which is what gives you the stored codes.

 

Those blinks indicate MODES, 1-5.

[Cory74700]

i got it, i read another forum post here, and did that, and it threw 12, which is air flow meter, or mass airflow sensor. still my problem persists, because ive sucked water in my intake mefore and thats never happened.... does it just mean my mass air flow sensor is still wet??

[Kingman]

Probably, take it out and clean it and the connections.

[Cory74700]

I have no experience with mass airflow sensors, or the whole Throttlebody Intake to be quite truthful, have you any experience with removing it and cleaning it??

[Kingman]

Check out the how-to section in the garage. There's a few pinned threads to take a look at.

[Cory74700]

ok ill do that thank you for all your help