icee20 Posted October 4, 2011 Share Posted October 4, 2011 For the life of me I can not figure out how to replace the burnt out bulb on my fog light. I have removed the adjustment screws, no dice... Can some-one out there tell me how to do this, I have some pics down below. Thank you for the help Link to comment Share on other sites More sharing options...
Trogdor636 Posted October 4, 2011 Share Posted October 4, 2011 (edited) For the life of me I can not figure out how to replace the burnt out bulb on my fog light. I have removed the adjustment screws, no dice... Can some-one out there tell me how to do this, I have some pics down below. Thank you for the help Look at the foglight again, is that a little clip on the bottom holding the lens on? You wont have to remove the entire thing, the lens itself should pop off and then you can replace the bulb. Edited October 4, 2011 by Trogdor636 Link to comment Share on other sites More sharing options...
MrT Posted October 5, 2011 Share Posted October 5, 2011 You have to remove the lamp. One screw on the inside (toward the middle) and a bolt on the outside (toward the fenders). Pull the whole thing out and then there are four screws on the back. Be careful, they are easy to break. Pop the back off and it's pretty self explanatory from there. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now