Jump to content
  • Sign In Changes:  You now need to sign in using the email address associated with your account, combined with your current password.  Using your display name and password is no longer supported.

 

  • If you are currently trying to register, are not receiving the validation email, and are using an Outlook, Hotmail or Yahoo domain email address, please change your email address to something other than those (or temporary email providers). These domains are known to have problems delivering emails from the community.

front axle noise


gas92
 Share

Recommended Posts

Hello, new guy here, had 3 pathfinders so far, and this is the first of this problem. when in 4x4, on hard gravel, i was given er up a hill, and i heard this grinding sound coming from front of the truck. like a drill chuck set to low torque. things i have done, pulled axle out, boots are fine, no play, auto hubs seam to be fine, re greased and put back togeather. befor i pulled the axle out, i just had the hub off, grabed the end of the axle spline,gave it a wiggle, with snap ring still on, there was some play in all directions. mabe 1/8 all around. is that ok??

also do i always have to back up to disengage the 4x4, i do it sometimes.

 

thanks for the help

Link to comment
Share on other sites

As far as I'm aware there shouldn't be any play... and it is normal to have to back up to disengage the hubs. Stupid design, I switched to manual hubs...

the cause of the play in the outer shaft,would that be the bearings. and the clicking,from the frontt wheels,what would that be from. thanks for the help.

manual hubs are in the future

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...