GHSER7 Posted October 2, 2007 Share Posted October 2, 2007 Would these rock crawers off the WD21 fit my R50? I'm not sure about the backspacing and lug pattern. I am planning to do a 2" lift as well b/f I mount them. from this link: http://npora.ipbhost.com//index.php?showto...20&start=20 thnx in advance! Link to comment Share on other sites More sharing options...
Acey Posted October 2, 2007 Share Posted October 2, 2007 THey should fit. The lug pattern is the same. Take a ruler and place it where the wheel meets the hub measure your backspacing to the back edge of the rim. Link to comment Share on other sites More sharing options...
GHSER7 Posted October 2, 2007 Author Share Posted October 2, 2007 Yeah now that I think about it, I did have the '97 4x4 Pickup 5-spoke wheels on my '95 pathfinder. Although the Pickup was based off the WD21s and noth the R50s. My main concern is the back spacing. From what I read, people say go 4" to 4.5" on the R50s. He's saying 3.5" to 4", which has me a little worried. I guess worst case senario I can put a 1/2" spacer on there and maybe some longer lug studs, but is it worth the trouble then? lol Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now